IBEW 113
Tool List

Inside Wireman

Each Journeyman shall provide himself or herself with a standard conventional kit of hand tools consisting of the following:

1 Pair side cutting pliers
1 Pair of long nose pliers
1 Pair of diagonal cutters
2 Pairs channel lock or gas pliers
1 Claw hammer and ball peen, if desired
1 Wood chisel
1 Cold chisel
1 Set of screwdrivers
1 Plumb bob
1 Center punch
1 Keyhole saw
1 Voltage tester
1 Level (not over 18″)
1 6′ rule and/or up to 12′ steel tape
1 Tap wrench
1 Adjustable hacksaw frame
1 Small metal file
2 Pipe wrenches (10″ to 14″) or equal chain wrench
1 Chalk line
1 Tri-square
5 Speed wrenches – not to exceed one-half inch (1/2″)
1 Crescent wrench (8″ to 10″)
1 Set of Allen head wrenches (1/2″)
1 Flashlight (less batteries) with or without continuity test leads
1 Pocket Knife
Pencils
1 Copy of the latest edition of the National Electrical Code and the City Code where applicable

Optional List:

Protractor
End Wrenches to 3/4″
18″ Bit extension
Steel tape not to exceed 25′
Wire strippers
Tubing Cutters
Battery Powered Screwdriver
Volt Pen
No dog type levels

THESE TOOLS SHALL BE KEPT IN THE EMPLOYEE’S PERSONAL TOOL BOX WHICH WILL BEAR HIS OR HER NAME FOR THE PURPOSE OF IDENTIFICATION.

Residential Wireman

Lineman Pliers (insulated)
Needle Nose Pliers (insulated)
Channel Locks (insulated)
7″ or 9″ Dykes (insulated)
Small & Medium Phillips Screwdriver
Small & Medium Straight Screwdriver
Twirly or Yankee Screwdriver
Nut Driver, One Set
Keyhole Saw
Hacksaw
Wire Rippers or Hook Blade Utility Knife
Hammer
Voltage Tester
Awl
Current National Electrical Code Book

VDV Technician

Punch tool w/110 & 66 blades
RJ-45/RJ-11 crimp tool
Coax crimp tool (RG-59, 62 & 6)
Cat 5 strippers
Wire strippers (Miller type)
Utility knife
Wire Cutters
T&B Sta-Kon tool
Lineman pliers
Channel locks (2 pairs)
Flathead screwdrivers (assorted sizes)
Phillips-head screwdrivers (assorted sizes)
Sheetrock saw (hand type)
Nutdrivers (1/4” through 7/16”)
Hacksaw
Hammer
Tool pouch
Volt-ohm meter
Toolbox (20” x 8½” x 9” minimum with lock)
Scissors
Awl
Flashlight
Tone generator
Tape measure
Adjustable wrench
Needle-nose pliers
Torpedo level (8”)